A Hand Swaging Tool That Actually Works
We are sure how frustrating it is to try to pick out the important points about the item you're looking at - all the extra words that just confuses.
Well, we are here to change that!
Our editors have stripped off all those unnecessary words down to just the bare facts for you.
We help readers save time & just get to it!
All the descriptions found in Amazon are usually lengthy, flowery & unnecessary.
What we did is to cut the sales pitches to just the bare facts that you need to know to make an informed decision.
Now you can just zero in on what’s important & save a ton time from reading unnecessary stuff.
Zoe Leon, Editor
These tools use pressure to expand or stretch the end of a piece of copper tubing so it can be made into a permanent brazed connection.
VEVOR Hand Swager Crimper, 24 Inch
Amazon's Best Sellers #123 in Crimpers for more choices
- 2-in-1 tool for crimping and cutting, capacity: 3/16", sewage on 1/16'', 3/32'', 1/8'', 5/32" and 3/16'' sleeves, max cutting capacity 5/32"
- Constructed of high quality alloy steel with heat treatment
- Cutting blade has high hardness and good abrasion resistance
- Ergonomic design - thickened, anti-slip, and insulated handles for extended use
- Easily operated by cutting off desired length, adjust the sleeve length, place the cable in the slot and crimp
- Swaging tools ideal for wire rope copper and aluminum oval sleeves and stop sleeves
Sanuke Wire Rope Crimping Swaging Tool
Amazon's Best Sellers #19 in Crimpers for more choices
- Made of heavy duty stainless steel for maximum corrosion resistance to sea water corrosion and rust
- 4 crimping positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm
- Easily crimp copper / aluminum sleeve and more from 50-450 lb test line
- Crimping tool coordinate with barrel ferrule can be widely used for wire rope, cable line dog leashes and etc
- The 2 hardened steel side cutters work with the spring which loaded handle to help cut the wire without frays and the strong spring open the cutters
- Cushioned non-slip grips
- Feature a Safety lock to keep your crimper closed, includes a safety lanyard
- Includes 4 sizes 160 pieces Barrel Ferrule and 10 pieces Steel Thimble Kit
- 4 sizes of M1 ,M1.2, M1.5, M2, total 160 pieces crimping loop sleeve in a package
- Made of high quality aluminum, anti-corrosion and durable
- 10 pieces M2 steel thimble meets your different needs and easy to use, just lock both ends of the guide wire by vise, pliers or compression tools
- Great to work on assorted sizes stainless steel cable array for deck railing
Rekobon Wire Rope Swager Tool
Amazon's Best Sellers #70 in Crimpers for more choices
- Made of heavy-duty stainless steel, corrosion and rust resistance
- 4 positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm
- Easily crimp copper/aluminum sleeve and more from 50-450 lb test line
- Non-slip grips and self-locking
- Comes with 2 hardened steel side cutters to cut wires without fraying and the strong spring opens the cutters instead by your hands
- Coordinate with aluminum double-barrel ferrule crimping loop sleeve can be used for wire rope
- Includes 100 pieces Aluminum double-barrel ferrule crimping loop sleeve kit
- Crimps aluminum sleeves of 3/32" and below
- The cutting section can only cut wire ropes 1/16" and below
For more choices, look here for Amazon's 100 Best Sellers in Crimpers
Hand Swaging Tool FAQ
People are always asking us questions about the best hand swaging tool, and there are too many models available that makes choosing the best one a headache.
It can be hard to find good information about getting the right tools, especially if you had not used them before or not sure where to look. Or worse, you might end up with bad information that should have been to make your home projects much easier.
We know you are a seasoned handyperson or a trade professional looking for a replacement but for the benefit of new users, these hand swaging tool to complete your projects professionally.
We've done the research for you! Here are the most frequently asked questions about the hand swaging tool and our top answers:
What is a swaging tool used for?
The swaging tools use pressure to expand or stretch the ends of copper tubing to permanently fit together over a second piece of the same diameter.
What is a hand Swager?
A hand swager tool is purpose-built to rig wire ropes together.
What is the difference between swaging and crimping?
Crimping will only compress the edges of a sleeve or ferrule around the cable. Swaging will completely deform the swage sleeve around the cable.
Both swagging and crimping will add a sleeve or ferrule around the cable.
How strong is swaging?
When using a swage tool for an assembly, the two metal parts are compressed to form a bond between them.
Swaging is used to create wire rope because it creates a tight fit that prevents the wire from unraveling after being put under pressure, and can lift several thousand pounds.
What is the process of swaging?
It's called swaging because it compresses metal into a specific shape.
During the process, a metal workpiece is forced through a die, and as it's pushed through, it takes the die's shape.
What is wire rope swaging?
The mechanical cable is made by twisting individual wires together to form strands.
Strands are then twisted together to make wire rope.
A swaged rope is the process of taking this rope and hammering its outer diameter to flatten compacting the strands.
These are the tools that will make your work easier and will make you get the best of your work.
We hope you have benefitted from our article and saved you some time to research yourself.
Thank you for supporting our efforts.
