The Best Propress Hand Tool For The Job
We are sure how frustrating it is to try to pick out the important points about the item you're looking at - all the extra words that just confuses.
Well, we are here to change that!
Our editors have stripped off all those unnecessary words down to just the bare facts for you.
We help readers save time & just get to it!
All the descriptions found in Amazon are usually lengthy, flowery & unnecessary.
What we did is to cut the sales pitches to just the bare facts that you need to know to make an informed decision.
Now you can just zero in on what’s important & save a ton time from reading unnecessary stuff.
Zoe Leon, Editor
The ProPress hand tool is used to press the fitting, making a permanent connection which will be leak-proof, are fast to execute, done without flames and the end result is extremely reliable.
As connecting the fittings are done without the need for flames, the process is performed in a completely safe environment.
Furthermore, the copper or stainless pipes need not be drained or be dry for the fittings to be pressed.
GSFTOP Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2",3/4" and 1" Jaw Copper Pipe
Amazon's Best Sellers #93 in Crimpers for more choices
- Designed with hydraulic cylinder which allows a single person operations for leak-free connections
- 360° rotatable tool head to work at odd angles
- Crimping jaws of 1/2", 3/4", 1" can be changed by sliding in and out
- No brazing or soldering required, just a few pumps to get the fitting compressed in seconds
- The body made of 40Cr for more strength of 8 tons crimping force
- Compatible with Viega Copper, Pro-Press, Elkhart, Conex pipe fittings
iCirmp F1807 PEX Copper Pipe Crimping Tool Kit
Amazon's Best Sellers #56 in Crimpers for more choices
- Suitable for 3/8-inch, 1/2-inch, 3/4-inch, 1-inch PEX copper crimp rings and crimp style PEX fittings
- Compatibility with Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands). Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively). All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc.
- User Manual included on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool
- Crimp Ring Removal Tool to remove copper crimp rings to be used more than once
- Easy dial setting adjusts for crimp ring sizes
- Compatible with brass and PPSU fittings
BOSAD Copper Tube Fittings Hydraulic Pipe Crimping Tool
- For 1/2 inch, 3/4 inch, 1 inch copper pipes
- Made of aluminum alloy for more strength
- Rotatable head to reach tight angles
- Compatible with Viega Copper, Pro-Press, Elkhart, Conex Pipe Fittings
For more choices, tap here for the 100 Best Sellers in Crimpers
Propress hand tool FAQ
People are always asking us questions about the best Propress hand tool, and there are too many models available that makes choosing the best one a headache.
It can be hard to find good information about getting the right tools, especially if you had not used them before or not sure where to look. Or worse, you might end up with bad information that should have been to make your home projects much easier.
We know you are a seasoned handyperson or a trade professional looking for a replacement but for the benefit of new users, these Propress hand tool to complete your projects professionally.
We've done the research for you! Here are the most frequently asked questions about the Propress hand tool and our top answers:
What is a ProPress tool used for?
The ProPress tool allows you to install the fitting permanently & will not leak.
They’re also fast, flameless, and they’re reliable.
Is ProPress better than solder?
Propress systems don’t need an open flame for their finishing processes. This eliminates the use of flammable chemicals which creates a safe workspace.
A further advantage over soldering is that ProPress fittings can be installed without having to drain and dry the pipes before installation.
How long does a ProPress fitting last?
More than 25 years, if the water quality is acceptable.
Can a ProPress leak?
If you press a fitting without properly inserting the copper tubing or the tool's jaws not aligned, you will experience leakage.
Can you use ProPress on steel?
When we use ProPress, we are using the Viega trademark name for CTS technology.
MegaPress is used on iron pipe size (IPS) systems like carbon steel, galvanized, and stainless steel.
Can you ProPress over a solder joint?
Yes, you can solder next to ProPress fittings, but must be at least three tube diameters away from the connection to prevent damage to the sealing element.
These are the tools that will make your work easier and will make you get the best of your work.
We hope you have benefitted from our article and saved you some time to research yourself.
Thank you for supporting our efforts.
