Get The Best Cast Cutter Saw To Easily Remove Plaster Cast Off
Our customers want the best products available, and they expect a lot from us.
The best cast cutter saw on the market uses a high power motor and a specially designed blade. This blade cuts the plaster cast so smoothly that it never hurts the patient.
We've done our research on the best cast cutter saw and found that it's the Plaster Cast Cutter Saw. But the best part? It's also super easy to use!
There are a lot of different things that can happen with a cast, and not all casts require a cast cutter. A cast cutter saw is a good tool to have at home too, especially if you are making plaster casts for a hobby.
The best cast cutter saw is a must-have for any doctor. Get yours before they sell out!
Order yours today and get it shipped to you fast before they sell out.
How To Choose Which Model Is Best For You
Match the features, capabilities to your budget. Once you have narrowed down, click on the green "Check Price On Amazon" button to get further confidence you have made the right choice by reading some past customers reviews.
Why Would We Want The Best For You
Would the best cast cutter saw easily and painfully cut the plaster cast off my patients? Most of the time, a patient cannot cut off the cast themselves because they don't have any medical training or equipment.
I'm often surprised when people think it is possible to remove casts yourself. However, I do have a better solution for you. With our cutter cast saw recommendations, you can remove the plaster without any risk to your skin, bone, or soft tissue.
It’s not that difficult! We found the best cast cutter saw at Amazon, and it’s a fraction of the price of what you would pay at a high street store.
BAOSHISHAN Electric Cast Cutter Saw
Amazon #243 in Power Circular Saws
Why We Think This Is One Of The Best
(why this item is a must buy)
- Remove plaster bandage including high polymer bandage
- Double insulated protection of the electric motor avoids electric shocks
- Low noise micro motor produces minimal vibration
- Adjustable speed from 1 to 6 gears for gentle injury-free cutting
- Use gear 5 or 6 to cut the plaster surface, then turn to a lower gear
- Plaster saw blades are consumable and must be replaced
Things To Know About This Model
(what you should know)
- Weight : 6.4 lbs
- Power : 125W
- Oscillation : 12500 times/min
- Oscillating angle : 5 degrees
- Included : 3 saw blades, case
Wadoy Medical Electric Plaster Saw
Amazon #144 in Power Shears
Why We Think This Is One Of The Best
(why this item is a must buy)
- Designed to remove plaster bandage
- Gear 6 can also be used to cut fiberglass (although not recommended due to excessive dust)
- Features: Anti-shock, Protection against harmful liquids seeping into motor, Low noise, Low vibration, Anti-overheat, Extended Alloy blade usage
- Will not injure skin even if blade contacts the skin
- Double insulation protective device to ensure the safety of operators and patients
- FDA approval
- Adjustable speed, start on high gear and turn to low gear when nearing skin surface
Things To Know About This Model
(what you should know)
- Weight : 6.4 lbs
- Power : 125W
- Oscillation : 12500 times/min
- Included : 2x Circular Saw Blade, Fan-shaped Saw Blade, Wrench, Carry Box
T-king Medical Electric Plaster Saw Cast Cutter
Amazon #1 in Cast Cutter
Why We Think This Is One Of The Best
(why this item is a must buy)
- Double insulation protective device to ensure safety of patients
Things To Know About This Model
(what you should know)
- Weight : 5.7 lbs
- Power : 125VA
- Oscillation : 12500 times/min
- Included : 2x Circular Saw Blade, Fan-shaped Saw Blade, Wrench, Carry Box
Altoserlea Medical Electric Plaster Saw Cast Cutter
Amazon #32 in Power Shears
Why We Think This Is One Of The Best
(why this item is a must buy)
- Double insulation protective device provides patient's safety
- Anti-shock type, protection against harmful liquid entry points
Things To Know About This Model
(what you should know)
- Weight : 5.8 lbs
- Power : 125VA
- Oscillation : 12500 times/min
- Included : 2x Circular Saw Blade, Fan-shaped Saw Blade, Wrench, Carry Box
Best Cast Cutter Saw FAQ
People are always asking us questions about the cast cutter, and there are too many models available that makes choosing the best one a headache.
It can be hard to find good information about getting the right tools, especially if you had not used them before or not sure where to look. Or worse, you might end up with bad information that should have been to make your home projects much easier.
We know you are a seasoned handyperson or a trade professional looking for a replacement but for the benefit of new users, the best cast cutter can make your tile installation projects a whole lot easier.
We've done the research for you! Here are the most frequently asked questions about the best cast cutter and our top answers:
What saw is used to cut casts?
A cast saw is a power tool meant to remove orthopedic casts.
The cast saw cuts material by quickly vibrating or oscillating the small teeth of a sharp blade over a narrow angle.
Can a cast saw cut you?
This saw has a special blade that won't cut you as the blade moves from side to side to break up the cast, so it doesn't hurt your skin.
When the doctor gets the cast off with the saw moving around, it can tickle you.
What is a cast saw used for?
A cast saw is a tool that's used to cut plaster and fiberglass casts.
It uses a short, sharp, small-toothed blade, and it rapidly oscillates back and forth to cut the material.
Can a cast saw cut metal?
Cast saws don't have a rotating blade; instead, their sharp blades oscillate.
Cast saws may offer advantages in cutting most types of materials. They can cut sheets of plastic, small diameter metal tubing, and even concrete — when used with the right blades.
Why does it hurt after a cast?
After the cast is removed, you’ll feel some discomfort in the bone and joint areas that were immobilized, your arm or leg may be smaller than the other side, and your skin will probably look different than it did before.
Take a few baths in warm water to soothe your skin and soften the hair and body.
Can you Xray through a hard cast?
Plastic casts are usually light and more durable than plaster casts.
X-rays do penetrate fiberglass casts better than plaster casts, makes it easier for your doctor to examine your child while they're still wearing the cast.
How do you remove a cast without a saw?
Use warm water with a tablespoon of vinegar to fully submerge the cast. Soak the cast until the plaster loosen up, then find a loose layer to slowly unwrap. Finish by gently washing up any remaining plasters.
How do you remove a fiberglass cast without a saw?
A good option would be to use casting shears or cast scissors.
Make sure to speak with your doctor before doing this to confirm you'll be doing it correctly.
Casting shears are used to cut through the hard orthopedic cast.
Do casts get tighter?
The cast is meant to fit snuggly especially for the first few days as it is meant to protect your injury from movement.
When it's tight, it means the cast is correctly fitted.
What are the 4 types of cast?
Plaster cast made of gauze and wet plaster strips. Synthetic cast made from fiberglass or plastic strips. Cast brace made of hard plastic. Splint or half cast made from slabs of plaster or fiberglass.
We hope this article has helped make your decision easier and that you enjoy using your purchase!
